Opis proizvoda
Specifications
| Part number | DZCE5RG-070/40N-EI/E0K11A | Brand | Duplomatic MS |
| Valve type | Pilot-operated proportional pressure reducing / relieving; hydraulic balancing | Mounting | Subplate mounting |
| Nominal size | NG10 | Mounting interface | ISO 4401-05-05-0-05 (CETOP R05-350) |
| Controlled pressure range | 1-70 bar | Maximum operating pressure | 350 bar |
| Maximum flow | 150 l/min (see catalogue operating curves) | Pilot / drain | EI: external pilot, internal drain |
| Maximum T-port backpressure | 2 bar with internal drain | Supply voltage | 24 V DC; permissible range 19-30 V DC |
| Command / monitor signal | 0-10 V (E0) | Pin C function | A: external enable |
| Electrical connection | K11: 6 pin + PE; mating connector ordered separately | Seals / fluid | NBR (N); HL / HM mineral hydraulic oil |
| Protection | IP65 / IP67 with a correctly fitted mating connector of equivalent rating | Power consumption / duty | 25 VA / 100% continuous |
| Hysteresis / repeatability | <2% / <±2% of maximum pressure | Ambient / fluid temperature | -20 to +60 °C / -20 to +80 °C |
| Viscosity / recommended | 10-400 cSt / 25 cSt | Fluid cleanliness | ISO 4406:1999, class 18/16/13 |
| Catalogue mass | 7.5 kg | Availability | On order; availability and lead time confirmed with quotation |
CAD reference: The image and downloadable DWG show DZCE5RG-070/40N-II/E0K11A, a dimensional reference for this valve size. The listed valve DZCE5RG-070/40N-EI/E0K11A has external piloting; the supplied CAD reference has internal piloting. Check the X/Y pilot and drain configuration against the selected execution and catalogue. Pressure range, command signal and pin C function for the ordered valve are specified above.
DZCE5RG-070/40N-EI/E0K11A proportional pressure reducing valve with integrated electronics
DZCE5RG-070/40N-EI/E0K11A is a Duplomatic NG10 proportional pressure reducing valve for industrial hydraulic pressure regulation and balancing applications. It reduces pressure from port P to working port A and permits flow from A to T when downstream pressure exceeds the electrically commanded setting. This execution controls 1-70 bar and has a maximum operating pressure of 350 bar. Catalogue maximum flow is 150 l/min; consult the performance curves for the selected pressure and operating conditions.
The on-board driver uses a 24 V DC supply and a 0-10 V command signal (E0). The 0-10 V monitor output represents solenoid current, not measured hydraulic pressure. Pin C requires an external 24 V enable signal. K11 identifies the 6 pin + PE main connection. The mating electrical connector, mounting bolts and subplate are ordered separately.
Code EI specifies external piloting and internal drainage. Maximum permissible T-port backpressure for this configuration is 2 bar. Supply the external pilot port X at a pressure at least 10% above the selected reduced-pressure setting, without exceeding 350 bar. NBR seals are intended for HL / HM mineral hydraulic oil. The mounting interface must be checked against the technical catalogue; DZCE5G and DZCE5RG have different mounting patterns.
Confirm the mounting pattern, controlled pressure range, supply voltage, command signal, pin C function and pilot/drain connections before ordering. FPM seals and other pilot/drain configurations are available on request, subject to a configuration-specific quotation. GL and GH electronics belong to separately priced executions and are not included in this standard G-series price.
IMPEX CONNECT supplies Duplomatic hydraulic valves for international B2B projects. Request a quotation for DZCE5RG-070/40N-EI/E0K11A or use our hydraulic component replacement service to check an existing valve. Product prices are indicative, exclude VAT and delivery; final availability and delivery conditions are confirmed individually.