Skip to product information
Duplomatic CR2/22N/K � 3D CAD view

CR2/22N/K - Duplomatic pressure relief cartridge valve

€46,80
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Manufacturer Duplomatic MS Model / ordering code CR2/22N/K
Valve function Pressure relief Operating principle Direct operated
Cartridge cavity D-10B Mounting thread M20×1.5
Maximum operating pressure 350 bar Maximum flow rate 50 l/min
Pressure adjustment range Up to 25 bar Adjustment Adjustment knob /K
Seal material NBR Cartridge tightening torque 45–50 Nm
Approximate catalogue mass 0.16 kg Fluid Mineral hydraulic oil HL/HM, ISO 6743-4
Ambient temperature −20 to +60 °C Fluid temperature −20 to +80 °C
Viscosity 10–400 cSt Recommended viscosity 25 cSt
Fluid cleanliness ISO 4406:1999 20/18/15 Design series 22

CR2/22N/K — Duplomatic pressure relief cartridge valve

The CR series provides direct-operated pressure relief in a compact cartridge for D-10B cavities. The circuit pressure acts on a spring-loaded poppet. When the selected pressure setting is reached, excess flow is discharged towards tank port T. This construction can limit system pressure and pressure peaks caused by changes in actuator motion. The selected spring range and the flow-dependent pressure characteristic must be checked together when sizing the valve.

This CR2/22N/K version has up to 25 bar pressure adjustment and adjustment knob /k. The cartridge is rated for 50 l/min and a maximum operating pressure of 350 bar. NBR seals are specified for mineral hydraulic oil. For replacement selection, match the complete code, cavity drawing, flow and pressure range. Minimum controlled pressure and pressure rise depend on flow; consult the attached characteristic curves. The cartridge tightening torque is 45–50 Nm.

You may also like