Product Description
| Manufacturer | Duplomatic MS | Model / ordering code | CR6/22N/K |
| Valve function | Pressure relief | Operating principle | Direct operated |
| Cartridge cavity | D-10B | Mounting thread | M20×1.5 |
| Maximum operating pressure | 350 bar | Maximum flow rate | 50 l/min |
| Pressure adjustment range | Up to 350 bar | Adjustment | Adjustment knob /K |
| Seal material | NBR | Cartridge tightening torque | 45–50 Nm |
| Approximate catalogue mass | 0.16 kg | Fluid | Mineral hydraulic oil HL/HM, ISO 6743-4 |
| Ambient temperature | −20 to +60 °C | Fluid temperature | −20 to +80 °C |
| Viscosity | 10–400 cSt | Recommended viscosity | 25 cSt |
| Fluid cleanliness | ISO 4406:1999 20/18/15 | Design series | 22 |
CR6/22N/K — Duplomatic pressure relief cartridge valve
The CR series provides direct-operated pressure relief in a compact cartridge for D-10B cavities. The circuit pressure acts on a spring-loaded poppet. When the selected pressure setting is reached, excess flow is discharged towards tank port T. This construction can limit system pressure and pressure peaks caused by changes in actuator motion. The selected spring range and the flow-dependent pressure characteristic must be checked together when sizing the valve.
This CR6/22N/K version has up to 350 bar pressure adjustment and adjustment knob /k. The cartridge is rated for 50 l/min and a maximum operating pressure of 350 bar. NBR seals are specified for mineral hydraulic oil. For replacement selection, match the complete code, cavity drawing, flow and pressure range. Minimum controlled pressure and pressure rise depend on flow; consult the attached characteristic curves. The cartridge tightening torque is 45–50 Nm.
