Product Description
| Manufacturer | Duplomatic MS | Model / ordering code | CRQ4/M1/12 |
| Valve function | Pressure relief | Operating principle | Pilot operated |
| Cartridge cavity | D-10C | Mounting thread | M20×1.5 |
| Maximum operating pressure | 350 bar | Maximum flow rate | 100 l/min |
| Pressure adjustment range | Up to 140 bar | Adjustment | Adjustment knob /M1 |
| Seal material | NBR | Cartridge tightening torque | 45–50 Nm |
| Approximate catalogue mass | 0.16 kg | Fluid | Mineral hydraulic oil HL/HM, ISO 6743-4 |
| Ambient temperature | −20 to +60 °C | Fluid temperature | −20 to +80 °C |
| Viscosity | 10–400 cSt | Recommended viscosity | 25 cSt |
| Fluid cleanliness | ISO 4406:1999 20/18/15 | Design series | 12 |
CRQ4/M1/12 — Duplomatic pressure relief cartridge valve
CRQ is a pilot-operated pressure relief cartridge for D-10C cavities. A balanced main spool is controlled by a pilot stage. The normally closed main stage opens when circuit pressure exceeds the pilot setting, discharging excess flow to port T. The pilot-operated arrangement supports the use of pump flow at operating pressures close to the selected setting. CRQ and the direct-operated CR use different cavity designs and must not be treated as interchangeable solely because their pressure ranges overlap.
This CRQ4/M1/12 version has up to 140 bar pressure adjustment and adjustment knob /m1. The cartridge is rated for 100 l/min and a maximum operating pressure of 350 bar. NBR seals are specified for mineral hydraulic oil. For replacement selection, match the complete code, cavity drawing, flow and pressure range. Minimum controlled pressure and pressure rise depend on flow; consult the attached characteristic curves. The cartridge tightening torque is 45–50 Nm.
