Product Description
Specifications
| Part number | DT03-2F/11N-D24K1 | Brand | Duplomatic MS |
| Valve type | Direct operated poppet directional control valve | Nominal size | NG6 / CETOP 03 |
| Hydraulic configuration | 2/2; scheme 2F | Control / Function | 2/2 normally open |
| De-energized connections | P connected to A | Energized connections | P and A blocked |
| Active ports | P / A | Solenoid / return | One solenoid on side B; spring return |
| Maximum operating pressure | 250 bar | Maximum flow for this version | 12 l/min; operating-limit curve 2 |
| Supply voltage | 24 V DC | Coil power consumption | 26.4 W |
| Electrical connection | K1 — EN 175301-803 (ex DIN 43650) | Connector / rectifier | Connector not supplied; order separately |
| Mounting interface | ISO 4401-03-02-0-05 | Seal material | NBR (N), for mineral hydraulic oil |
| Manual override | Standard manual override | Catalogue mass | 1.3 kg |
| Ambient temperature | −20 to +50 °C | Fluid temperature | −20 to +80 °C |
| Viscosity range / recommended | 10–400 / 25 cSt | Fluid cleanliness | ISO 4406:1999, class 20/18/15 |
| Duty cycle / voltage tolerance | 100% / ±10% | Protection rating | IP65 with correctly installed connector |
| Switching time, on / off | 30 / 50 ms at catalogue test conditions | Fastening | 4 × M5 × 50; tightening torque 5 Nm |
Duplomatic DT03-2F/11N-D24K1 NG6 poppet directional valve
DT03-2F/11N-D24K1 is a direct operated solenoid poppet valve with a conical seat, 2/2 configuration and spring return. Scheme 2F provides 2/2 normally open. De-energized: P connected to A. Energized: P and A blocked. The two-way design provides bidirectional sealing.
Maximum operating pressure is 250 bar. This version follows operating-limit curve 2, with flow up to 12 l/min; permissible flow decreases with pressure. The family rating of 25 l/min does not apply to every execution. The D24 coil operates on 24 V DC. The K1 connector is ordered separately.
During switching, all valve flow paths are interconnected. With accumulator supply or high-delivery pumps, use suitable orifices on the accumulator side to limit flow to 12 l/min, while respecting the version-specific operating limits. This standard product has no optional D08/D10 port-P orifice.
NBR seals suit mineral hydraulic oil. The primary CAD view and downloadable DWG represent the external side-B construction shared by 3A, 3B, 2F and 2G in the catalogue. The supplied CAD reference is D24; the ordering code specifies the hydraulic function and electrical equipment. IMPEX CONNECT supports international B2B sourcing of DT03-2F/11N-D24K1 for industrial hydraulic systems. delivery is confirmed on request.