Skip to product information
Duplomatic DT03 NG6 poppet directional valve, solenoid side-b, CAD external view

DT03-3A/11N-D24K1 - Duplomatic NG6 3/2 normally open poppet directional valve, 24V DC

€350,00
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Specifications

Part number DT03-3A/11N-D24K1 Brand Duplomatic MS
Valve type Direct operated poppet directional control valve Nominal size NG6 / CETOP 03
Hydraulic configuration 3/2; scheme 3A Control / Function 3/2 normally open
De-energized connections P connected to A; T blocked Energized connections A connected to T; P blocked
Active ports P / A / T Solenoid / return One solenoid on side B; spring return
Maximum operating pressure 250 bar Maximum flow for this version 12 l/min; operating-limit curve 2
Supply voltage 24 V DC Coil power consumption 26.4 W
Electrical connection K1 — EN 175301-803 (ex DIN 43650) Connector / rectifier Connector not supplied; order separately
Mounting interface ISO 4401-03-02-0-05 Seal material NBR (N), for mineral hydraulic oil
Manual override Standard manual override Catalogue mass 1.3 kg
Ambient temperature −20 to +50 °C Fluid temperature −20 to +80 °C
Viscosity range / recommended 10–400 / 25 cSt Fluid cleanliness ISO 4406:1999, class 20/18/15
Duty cycle / voltage tolerance 100% / ±10% Protection rating IP65 with correctly installed connector
Switching time, on / off 30 / 50 ms at catalogue test conditions Fastening 4 × M5 × 50; tightening torque 5 Nm

Duplomatic DT03-3A/11N-D24K1 NG6 poppet directional valve

DT03-3A/11N-D24K1 is a direct operated solenoid poppet valve with a conical seat, 3/2 configuration and spring return. Scheme 3A provides 3/2 normally open. De-energized: P connected to A; T blocked. Energized: A connected to T; P blocked. Match the P, A and T connections to the hydraulic circuit.

Maximum operating pressure is 250 bar. This version follows operating-limit curve 2, with flow up to 12 l/min; permissible flow decreases with pressure. The family rating of 25 l/min does not apply to every execution. The D24 coil operates on 24 V DC. The K1 connector is ordered separately.

During switching, all valve flow paths are interconnected. With accumulator supply or high-delivery pumps, use suitable orifices on the accumulator side to limit flow to 12 l/min, while respecting the version-specific operating limits. This standard product has no optional D08/D10 port-P orifice.

NBR seals suit mineral hydraulic oil. The primary CAD view and downloadable DWG represent the external side-B construction shared by 3A, 3B, 2F and 2G in the catalogue. The supplied CAD reference is D24; the ordering code specifies the hydraulic function and electrical equipment. IMPEX CONNECT supports international B2B sourcing of DT03-3A/11N-D24K1 for industrial hydraulic systems. delivery is confirmed on request.

You may also like