Product Description
| Manufacturer | Duplomatic MS | Model / ordering code | PLK08-350/10N |
| Valve function | Pressure relief | Operating principle | Direct operated |
| Cartridge cavity | SAE 08 | Mounting thread | 3/4-16 UNF-2B |
| Maximum operating pressure | 400 bar | Maximum flow rate | 3 l/min |
| Pressure adjustment range | Up to 350 bar | Adjustment | Hex socket screw, 6 mm |
| Seal material | NBR | Cartridge tightening torque | 50 Nm |
| Approximate catalogue mass | 0.15 kg | Fluid | Mineral hydraulic oil HL/HM, ISO 6743-4 |
| Ambient temperature | −20 to +60 °C | Fluid temperature | −20 to +80 °C |
| Viscosity | 10–400 cSt | Recommended viscosity | 25 cSt |
| Fluid cleanliness | ISO 4406:1999 20/18/15 | Design series | 10 |
PLK08-350/10N — Duplomatic pressure relief cartridge valve
The PLK08 is a direct-operated screw-in pressure relief cartridge for low-flow hydraulic circuits and pilot pressure protection. It fits an SAE 08 cavity with a 3/4-16 UNF-2B thread. Pressure acts directly against the spring-loaded poppet; when the setting is exceeded, the valve opens from port 1 towards reservoir port 2. Its 3 l/min flow rating makes it suitable for pilot circuits and pressure-limiting duties where a large main-flow relief valve is unnecessary.
This PLK08-350/10N version has up to 350 bar pressure adjustment and hex socket screw, 6 mm. The cartridge is rated for 3 l/min and a maximum operating pressure of 400 bar. NBR seals are specified for mineral hydraulic oil. For replacement selection, match the complete code, cavity drawing, flow and pressure range. Minimum controlled pressure and pressure rise depend on flow; consult the attached characteristic curves. The cartridge tightening torque is 50 Nm.
