Skip to product information
Duplomatic PRE3 K1 pilot operated proportional pressure relief valve - CAD 3D view

PRE3-140/20N-D12K1 - Duplomatic NG6 proportional pressure relief valve, 4-140 bar, 12 V DC

€510,00
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Specifications

Part number PRE3-140/20N-D12K1 Brand Duplomatic MS
Valve type Pilot operated proportional pressure relief valve Mounting Subplate mounting
Nominal size NG6 / CETOP 03 Mounting interface ISO 4401-03-02-0-05
Pressure control range 4-140 bar Maximum operating pressure, P 350 bar
Maximum T-line backpressure 2 bar Minimum / maximum flow 2 / 40 l/min
Factory pressure setting flow 10 l/min (reference condition) Nominal coil voltage 12 V DC
Maximum coil current 1.88 A Coil resistance at 20 °C 3.66 Ω
Electrical connection K1 — EN 175301-803 (ex DIN 43650) Seals NBR (N), for mineral hydraulic oil
Catalogue mass 3.5 kg Duty cycle / protection 100% / IP65
Ambient temperature −20 to +60 °C Fluid temperature −20 to +80 °C
Viscosity range / recommended 10–400 / 25 cSt Fluid cleanliness ISO 4406:1999, class 18/16/13
Hysteresis (PWM 200 Hz) <5% of nominal pressure Repeatability <±1.5% of nominal pressure

Duplomatic PRE3-140/20N-D12K1 proportional pressure relief valve

PRE3-140/20N-D12K1 is a pilot operated proportional pressure relief valve for continuous electrical pressure regulation in hydraulic circuits. This NG6 / CETOP 03 execution has a 4-140 bar pressure control range, a 12 V DC proportional coil, K1 electrical connection and NBR seals.

Maximum operating pressure at P is 350 bar. The operating flow range is 2–40 l/min. Factory full-scale pressure is set at 10 l/min; this is a reference condition, not a separately specified nominal flow rating. Full-scale pressure increases with flow, and minimum controlled pressure also depends on flow. Connect T directly to tank: maximum permissible backpressure is 2 bar and T-line backpressure adds to the controlled pressure.

The valve incorporates a mechanical maximum-pressure limitation feature. Use a current-controlled supply or a compatible external amplifier, such as EDC-142 / EDM-M142; maximum coil current is 1.88 A. Nominal voltage alone is not a proportional command signal. NBR seals are intended for HL/HM mineral hydraulic oils.

Install horizontally or vertically with the solenoid downward. Vent the solenoid tube at initial start-up and after prolonged inactivity, following the catalogue procedure. The shared CAD illustration and DWG show the PRE3 K1 construction; pressure range and voltage are identified by the selected ordering code.

IMPEX CONNECT supports international B2B sourcing of PRE3-140/20N-D12K1 for industrial hydraulic systems. Check pressure range, electrical control, fluid compatibility and mounting dimensions. Delivery time is confirmed on request.

You may also like