Product Description
Specifications
| Part number | PRE3-350/20N-D12K1 | Brand | Duplomatic MS |
| Valve type | Pilot operated proportional pressure relief valve | Mounting | Subplate mounting |
| Nominal size | NG6 / CETOP 03 | Mounting interface | ISO 4401-03-02-0-05 |
| Pressure control range | 5-350 bar | Maximum operating pressure, P | 350 bar |
| Maximum T-line backpressure | 2 bar | Minimum / maximum flow | 2 / 40 l/min |
| Factory pressure setting flow | 10 l/min (reference condition) | Nominal coil voltage | 12 V DC |
| Maximum coil current | 1.88 A | Coil resistance at 20 °C | 3.66 Ω |
| Electrical connection | K1 — EN 175301-803 (ex DIN 43650) | Seals | NBR (N), for mineral hydraulic oil |
| Catalogue mass | 3.5 kg | Duty cycle / protection | 100% / IP65 |
| Ambient temperature | −20 to +60 °C | Fluid temperature | −20 to +80 °C |
| Viscosity range / recommended | 10–400 / 25 cSt | Fluid cleanliness | ISO 4406:1999, class 18/16/13 |
| Hysteresis (PWM 200 Hz) | <5% of nominal pressure | Repeatability | <±1.5% of nominal pressure |
Duplomatic PRE3-350/20N-D12K1 proportional pressure relief valve
PRE3-350/20N-D12K1 is a pilot operated proportional pressure relief valve for continuous electrical pressure regulation in hydraulic circuits. This NG6 / CETOP 03 execution has a 5-350 bar pressure control range, a 12 V DC proportional coil, K1 electrical connection and NBR seals.
Maximum operating pressure at P is 350 bar. The operating flow range is 2–40 l/min. Factory full-scale pressure is set at 10 l/min; this is a reference condition, not a separately specified nominal flow rating. Full-scale pressure increases with flow, and minimum controlled pressure also depends on flow. Connect T directly to tank: maximum permissible backpressure is 2 bar and T-line backpressure adds to the controlled pressure.
The valve incorporates a mechanical maximum-pressure limitation feature. Use a current-controlled supply or a compatible external amplifier, such as EDC-142 / EDM-M142; maximum coil current is 1.88 A. Nominal voltage alone is not a proportional command signal. NBR seals are intended for HL/HM mineral hydraulic oils.
Install horizontally or vertically with the solenoid downward. Vent the solenoid tube at initial start-up and after prolonged inactivity, following the catalogue procedure. The shared CAD illustration and DWG show the PRE3 K1 construction; pressure range and voltage are identified by the selected ordering code.
IMPEX CONNECT supports international B2B sourcing of PRE3-350/20N-D12K1 for industrial hydraulic systems. Check pressure range, electrical control, fluid compatibility and mounting dimensions. Delivery time is confirmed on request.
