Product Description
| Manufacturer | Duplomatic MS | Model / ordering code | RQ5-W3/M/41 |
| Valve function | Pressure relief | Operating principle | Pilot operated |
| Nominal dimension, catalogue | DN 25 | Maximum flow rate | 250 l/min |
| Maximum operating pressure | 350 bar | Pressure adjustment upper limit | 70 bar (range code 3) |
| Minimum controlled pressure | Flow-dependent; see catalogue curve | Main stage | Poppet with conical seat |
| Pressure port P | 3/4 inch BSP | Tank / outlet port T | 1 inch BSP |
| Remote pilot port X | 1/4 inch BSP | Pressure gauge port | 3/8 inch BSP |
| Pressure adjustment | SICBLOC push-and-turn knob (/M) | Seal material | NBR, standard mineral-oil version; seal suffix omitted |
| Design series | 41; mounting dimensions unchanged for series 40–49 | Approximate catalogue mass | 4.1 kg |
| Ambient temperature | -20 to +60 °C | Fluid temperature | -20 to +80 °C |
| Fluid viscosity | 10–400 cSt; recommended 25 cSt | Fluid cleanliness | ISO 4406:1999 class 20/18/15 |
RQ5-W3/M/41 — Duplomatic pilot-operated pressure relief valve
RQ5-W3/M/41 is an in-line pressure relief valve with BSP threaded ports, a pilot-operated main stage and a conical poppet seat. The RQ5-W body is rated for 250 l/min, with nominal dimension DN 25 according to catalogue 21 220/117. This NBR version has a pressure adjustment upper limit of 70 bar and SICBLOC knob adjustment /M.
The maximum operating pressure is 350 bar. The selected pressure range is a separate parameter: codes 3, 5 and 6 identify settings up to 70, 210 and 350 bar. Minimum controlled pressure and pressure rise with flow depend on the operating point; use the characteristic curves for sizing. The pilot-operated design allows pump flow to pass through the relief path near the pressure setting, with wide internal passages to limit pressure losses.
Connections and adjustment
The P pressure inlet is 3/4 inch BSP, and the T outlet is 1 inch BSP. Remote pressure piloting is available through the separate 1/4 inch BSP X port; the pressure gauge connection is 3/8 inch BSP. Match the complete port arrangement to the hydraulic circuit and check return-line conditions before installation.
Operate the /M SICBLOC knob by pushing and turning at the same time. Standard NBR seals are intended for mineral hydraulic oils HL/HM according to ISO 6743-4. FPM/Viton versions require a separate specification.
Confirm the complete order code, pressure range, required flow and installation dimensions before selecting a replacement. The attached CAD represents the corresponding body size and adjustment configuration shared by the pressure range variants. IMPEX CONNECT accepts international B2B enquiries; availability, lead time and buyer-arranged collection are confirmed in the written quotation. Displayed prices exclude VAT.