Product Description
Specifications
| Part number | RQM7-P6/B/M/60N-A110K1/CM | Brand | Duplomatic MS |
| Valve type | Pilot operated pressure relief valve with solenoid unloading | Mounting size | ISO 6264-10, subplate |
| Version / function | B — One pressure setting; unloading when energized | Pressure adjustment range | Up to 350 bar (minimum depends on flow) |
| Maximum operating pressure | 350 bar | Maximum flow | 500 l/min |
| Main pressure adjustment | M — SICBLOC push-and-turn knob, main pressure only | Pilot solenoid supply | 110 V AC / 50 Hz / 120 V AC / 60 Hz, on/off |
| Electrical connection | K1 — EN 175301-803 (ex DIN 43650) | Connectors | Not supplied; order separately |
| Manual override | CM — boot-protected solenoid override | Seal material | NBR (N), for mineral hydraulic oil |
| Mounting interface | ISO 6264-10-17-*-97 | Pressure gauge port | 3/8 inch BSP |
| Ambient temperature | −20 to +50 °C | Fluid temperature | −20 to +80 °C |
| Viscosity range / recommended | 10–400 / 25 cSt | Fluid cleanliness | ISO 4406:1999, class 20/18/15 |
Duplomatic RQM7-P6/B/M/60N-A110K1/CM pressure relief valve with unloading
RQM7-P6/B/M/60N-A110K1/CM is a pilot operated pressure relief valve for ISO 6264-10 subplate mounting, with an on/off solenoid valve for unloading. Version B provides one pressure setting; unloading when energized. The main pressure is mechanically adjusted; this is not a proportional pressure-control valve.
The selected pressure adjustment range is up to 350 bar, while the maximum operating pressure of the valve is 350 bar. Minimum controlled pressure depends on flow; the catalogue does not specify a fixed lower limit for this range. Maximum flow is 500 l/min.
Main pressure adjustment: M — SICBLOC push-and-turn knob, main pressure only. The /M knob, where selected, acts on the main pressure control; it is distinct from /CM, the boot-protected manual override on the solenoid pilot valve. The pilot coil supply is 110 V AC. K1 electrical connectors are not included and must be ordered separately. NBR seals are intended for HL/HM mineral hydraulic oils.
The CAD illustration and DWG match the RQM7 A/B single-pressure construction with M knob and CM override. A and B use the same external construction but different unloading logic; the ordering code and specifications define the function. IMPEX CONNECT supports international B2B sourcing of RQM7-P6/B/M/60N-A110K1/CM for industrial hydraulic systems. Verify mounting interface, unloading state, pressure setting and supply voltage before replacement. Delivery time is confirmed on request.
AC supply code A110: 110 V AC / 50 Hz / 120 V AC / 60 Hz. This version has AC solenoids; use the matching AC CAD and electrical supply.