Product Description
| Manufacturer | Duplomatic MS | Model / ordering code | CD1-W4/10 |
| Valve function | Pressure relief / pressure control | Operating principle | Direct operated |
| Pressure adjustment upper limit | 140 bar (range code 4) | Maximum operating pressure | 350 bar |
| Maximum flow rate | 3 l/min | Minimum controlled pressure | Flow-dependent; see catalogue curve |
| Pressure port P | 1/4 inch NPT | Tank / outlet port T | 1/4 inch NPT |
| Mounting | Flange mounting, four fixing holes | Pressure adjustment | Recessed hex screw, 5 mm hex key; lock nut |
| Seal material | NBR, for mineral oil HL/HM | Seal code | N in RM2; omitted for standard CD1/RM3 |
| Design series | 10 | Approximate catalogue mass | 1.2 kg |
| Ambient temperature | -20 to +60 °C | Fluid temperature | -20 to +80 °C |
| Fluid viscosity | 10–400 cSt; recommended 25 cSt | Fluid cleanliness | ISO 4406:1999 class 20/18/15 |
CD1-W4/10 — Duplomatic direct operated pressure relief valve
CD1-W4/10 is a direct operated pressure control valve with a pressure adjustment upper limit of 140 bar and maximum flow of 3 l/min. This standard NBR version has a recessed hex pressure adjustment screw and locking nut.
The CD1-W is intended for low-flow pressure control and can also provide remote pilot control for control valves and two-stage pressure reducing valves. Both P and T ports are 1/4 inch NPT. The flanged body uses four mounting holes; check the mounting dimensions and sealing arrangement against the catalogue before installation.
The 350 bar maximum operating pressure and the selected pressure adjustment limit are separate ratings. Codes 3, 4, 5 and 6 identify adjustment limits of 70, 140, 210 and 350 bar respectively. Minimum controlled pressure and the pressure rise with flow depend on the operating point; use the catalogue curves for sizing.
Selection and installation
Clockwise rotation of the adjustment screw increases pressure. Specify the complete order code, thread standard and required flow when selecting a replacement. NBR seals are suitable for mineral hydraulic oils HL/HM according to ISO 6743-4. FPM/Viton versions require a separate specification. The CAD file represents the matching external adjustment configuration shared by the pressure range variants.
IMPEX CONNECT accepts international B2B enquiries for hydraulic pressure control components. Availability, lead time and buyer-arranged collection are confirmed in the written quotation. Displayed prices exclude VAT.