Skip to product information
Duplomatic DSP5 single AC solenoid on side B — representative CAD view

DSP5-SB3/10N-IE/A230K1 - Duplomatic NG10 pilot-operated directional valve, 230 V AC

€404,00
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Technical specifications

Manufacturer Duplomatic MS Ordering code DSP5-SB3/10N-IE/A230K1
Valve type Pilot-operated, solenoid-actuated directional valve Nominal size NG10 / CETOP P05
Mounting surface CETOP 4.2-4 P05-350 Spool / function SB3 / 4/2 float at rest
Solenoids / positions 1 / 2 Power supply 230 V AC
Pilot supply I — Internal pilot supply from P Drainage E — External drain through Y
Main-stage pressure rating P / A / B 350 bar Maximum inlet P for this pilot arrangement 210 bar
Maximum pressure T 250 bar Maximum pressure Y 160 bar
Maximum flow at 210 bar 150 l/min Maximum flow at 350 bar 120 l/min — external pilot required
Pilot pressure range 5–12 bar minimum, depending on flow; 210 bar maximum Seals / fluid NBR (N) / HL, HM — ISO 6743-4
Electrical connection K1 — EN 175301-803; mating connectors ordered separately Duty cycle / voltage tolerance 100% ED / ±10%
Protection IP65 with correctly wired and fitted matching connector Catalogue mass 5.9 kg
Fluid temperature −20 to +80 °C Ambient temperature −20 to +50 °C
Viscosity / recommended 10–400 / 25 cSt Fluid cleanliness ISO 4406:1999 — 20/18/15
Mounting screws / torque 4 × M6 × 35; 8 Nm (8.8), 12 Nm (10.9) Availability On order; lead time confirmed on enquiry

Duplomatic DSP5-SB3/10N-IE/A230K1 NG10 hydraulic directional valve

DSP5-SB3/10N-IE/A230K1 is a standard DSP5 series 10 pilot-operated directional valve with solenoid actuation, NBR seals and K1 electrical connections. The SB3 spool provides 4/2 float at rest; use its catalogue hydraulic symbol to confirm all flow paths. The valve has one solenoid, 2 positions and 230 V AC supply. It is suitable for industrial hydraulic power units, machine tools and machinery when selected within the catalogue limits.

Pilot supply, drainage and operating limits

Internal pilot supply from P. External drain through Y. Pilot pressure must be at least 5–12 bar, depending on flow, and no more than 210 bar. Internal pilot supply therefore limits inlet P to 210 bar; a 350 bar main-stage rating does not permit 350 bar at the pilot stage. Route Y separately to tank and keep Y pressure within 160 bar. The flow limit is 150 l/min at 210 bar and 120 l/min at 350 bar, subject to the selected spool and circuit. These are operating limits, not nominal flow ratings.

Operation at 350 bar inlet pressure requires a separately selected external-pilot arrangement or a suitable optional pressure-reducing version. This product is the standard internal-pilot version.

Mounting and technical documentation

DSP5 uses the CETOP P05 mounting surface. DSP5R has a different port layout and must not be assumed interchangeable. Check the mounting drawing, pilot/drain plugs, pressure–flow limits and electrical supply before ordering. Mating electrical connectors are not included. The CAD model and image represent the corresponding external solenoid arrangement; the exact spool function and internal pilot/drain configuration are specified by the ordering code.

AC coil rating: 230 V / 50 Hz; 240 V / 60 Hz.

Optional executions on request

The catalogue also describes high-pressure H versions, Z pilot-pressure reduction, C stroke control, D switching-time control, P08 damping, S2 pilot unloading and special seals or protective treatments. These options are not included in this standard product. Availability and compatibility require separate confirmation.

Request DSP5-SB3/10N-IE/A230K1 from IMPEX CONNECT for international B2B supply. Prices, where displayed, exclude VAT. Availability and delivery terms are confirmed with the quotation.

You may also like