Product Description
| Manufacturer | Duplomatic MS | Model | RPC-3T3/43 |
| Valve type | Three-way flow control valve, pressure and temperature compensated | Size | NG16 |
| Mounting | Subplate, ISO 6263-07 | Maximum operating pressure | 250 bar |
| Controlled flow, maximum | 150 l/min | Controlled flow, minimum | 0.130 l/min |
| Inlet / controlled outlet | E / U | Excess flow outlet | T, return to tank |
| Minimum pressure differential E–U | 12 bar | Built-in pressure relief valve | No |
| Adjustment | Six-turn knob with locking screw | Seals | NBR |
| Ambient / fluid temperature | −20 to +60 °C / −20 to +80 °C | Mass | 9 kg |
| Fluid viscosity | 10–400 cSt; recommended 25 cSt | Hydraulic fluid | Mineral oil HL / HM, ISO 6743-4 |
| Cleanliness | ISO 4406:1999 class 20/18/15; 18/16/13 for flow below 0.5 l/min | Mounting screws / torque | 4 × M10×90; 40 Nm |
RPC-3T3/43 – Duplomatic three-way flow control valve
Duplomatic RPC-3T3/43 is a pressure and temperature compensated three-way hydraulic flow control valve for subplate mounting. It delivers adjustable controlled flow from inlet E to outlet U up to 150 l/min, diverting excess flow to the tank through T. This supports actuator speed control while returning surplus pump flow at the pressure required by the circuit.
The standard six-turn calibrated knob includes a turn indicator and a locking screw. NBR seals are suitable for mineral oil HL/HM. Maximum operating pressure is 250 bar, and compensation requires at least 12 bar differential between E and U. The catalogue specifies a minimum controlled flow of 0.130 l/min.
Selection and installation
This standard RPC version has no built-in pressure relief valve; pressure protection must be provided by the hydraulic system. The RPCQ version incorporates an adjustable relief valve and is a different ordering configuration. Use the correct three-port ISO 6263-07 mounting pattern and check the E, U and T passages. The catalogue lists PMRPCQ3-AI6G rear-port subplates; E/U/T connections on these subplates are 1 inch BSP and X is 1/4 inch BSP. Confirm the port arrangement for the selected circuit.
The primary CAD image and downloadable DWG correspond to RPC-3T3/43. The additional family photograph shows an RPCQ version with a pressure adjustment screw; that screw is not part of this standard RPC model. Availability and delivery time are confirmed on request.