Skip to product information
Duplomatic EDM-J closed-loop proportional valve amplifier

EDM-J1/30E0-B/DXE5F - Duplomatic closed-loop valve amplifier

€394,50
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Specifications

Part number EDM-J1/30E0-B/DXE5F Brand Duplomatic MS
Amplifier type Closed-loop valve position control Matched valve family DXE5F
Solenoids per valve 1 Reference signal ±10 V
Power supply 19–30 V DC Matched coil voltage 12 V DC
Valve nominal current 3700 mA Enable function Pin 12 not connected
Position feedback LVDT Output current range 430–4000 mA
Mounting DIN rail EN 50022 Dimensions (W × H × D) 23 × 98 × 122 mm
Protection IP20 Ambient temperature −20 to +70 °C
Mass 0.13 kg Availability Supplied on request

EDM-J1/30E0-B/DXE5F Duplomatic closed-loop digital valve amplifier

EDM-J1/30E0-B/DXE5F is a DIN rail amplifier for DXE5F proportional valves with position feedback. It controls valve spool position using the ±10 V reference signal and LVDT feedback. This version controls one solenoid and requires a 19–30 V DC supply.

Matched valve execution

Use with the valve family specified in the full amplifier order code. DXE high-response valves require a dedicated parameter set matched to the valve; the amplifier and valve identification must be checked together during selection and commissioning. Select the amplifier by its complete order code, reference signal, enable function and valve execution.

The EDM-J provides programmable ramps, offset, gain and diagnostics. Mount inside an electrical cabinet, with IP20 protection and −20 to +70 °C operating temperature. IMPEX CONNECT supplies the amplifier on request with manufacturer technical documentation and assistance with model selection.

Configuration software

Configure and diagnose this EDM-J series 30 amplifier using EBC Valve Configurator 4.1.0.9 for Windows. The manufacturer catalogue specifies EBC version 3.2.0.8 or later. Connect the powered card to a PC with a USB Type-A to micro-B cable, ordered separately. The manufacturer recommends a galvanic USB isolator. Download the software archive using the Software (ZIP) button above; the archive includes the EBC software manual.

You may also like