Product Description
Specifications
| Part number | EDM-M112/31IOL | Brand | Duplomatic MS |
| Amplifier type | Open-loop proportional valve amplifier | Configuration | One single-solenoid valve |
| Reference signal | IO-Link | Power supply | 19–30 V DC |
| Nominal valve coil voltage | 24 V DC | Factory maximum current | 860 mA |
| Factory PWM frequency | 200 Hz | Enable function | Enable via IO-Link; redundant enable configurable on pin 12 |
| Mounting | DIN rail EN 50022 | Dimensions (W × H × D) | 23 × 98 × 122 mm |
| Protection | IP20 | Ambient temperature | −20 to +70 °C |
| Connections | 15-pole screw terminal block | Configuration software | IO-Link master tool |
| Mass | 0.15 kg | Availability | Supplied on request |
EDM-M112/31IOL Duplomatic digital proportional valve amplifier
EDM-M112/31IOL is a DIN rail mounted PWM amplifier for one single-solenoid valve. It provides current control for 24 V DC proportional valve coils, with a factory current setting of 860 mA and PWM frequency of 200 Hz. The command interface is IO-Link.
Valve compatibility
Factory matching covers DSE3, DSE3B, PRE, PRE3, PDE3, DZCE, PZE3, according to the solenoid configuration and coil execution. Select the valve voltage, nominal current and number of solenoids together with the amplifier code. M1 drives one proportional solenoid. Valves with integrated electronics use their own electronic driver.
Installation and commissioning
Enable via IO-Link; redundant enable configurable on pin 12. Reference values and setup are transferred via the IO-Link master. Install inside an electrical cabinet; the housing protection is IP20. The amplifier power supply must meet the nominal operating voltage of the connected solenoids.
IMPEX CONNECT supplies EDM-M112/31IOL for industrial hydraulic control applications. Download the manufacturer datasheet and use the compatible valve selections below to support product selection. Availability and delivery are confirmed with your quotation.
