Skip to product information
Duplomatic EDM-M series 40 DIN rail digital amplifier for proportional valves

EDM-M163/40E0-A - Duplomatic digital proportional valve amplifier

€273,60
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Specifications

Part number EDM-M163/40E0-A Brand Duplomatic MS
Amplifier type Open-loop proportional valve amplifier Configuration One single-solenoid valve
Reference signal Voltage (0–10 V / ±10 V, according to channel function) Power supply 9–32 V DC
Nominal valve coil voltage 12 V DC Factory maximum current 1530 mA
Factory PWM frequency 300 Hz Enable function External enable on pin 12
Mounting DIN rail EN 50022 Dimensions (W × H × D) 23 × 98 × 122 mm
Protection IP20 Ambient temperature −20 to +70 °C
Connections 15-pole screw terminal block Configuration software EDM40-SmartManager via micro USB
Mass 0.15 kg Availability Supplied on request

EDM-M163/40E0-A Duplomatic digital proportional valve amplifier

EDM-M163/40E0-A is a DIN rail mounted PWM amplifier for one single-solenoid valve. It provides current control for 12 V DC proportional valve coils, with a factory current setting of 1530 mA and PWM frequency of 300 Hz. The command interface is Voltage (0–10 V / ±10 V, according to channel function).

Valve compatibility

Factory matching covers PLKE08, PZME3, PZME5, according to the solenoid configuration and coil execution. Select the valve voltage, nominal current and number of solenoids together with the amplifier code. M1 drives one proportional solenoid. Valves with integrated electronics use their own electronic driver.

Installation and commissioning

External enable on pin 12. Configure ramps, current settings and diagnostics with EDM40-SmartManager through the on-board micro USB connection. Install inside an electrical cabinet; the housing protection is IP20. The amplifier power supply must meet the nominal operating voltage of the connected solenoids.

IMPEX CONNECT supplies EDM-M163/40E0-A for industrial hydraulic control applications. Download the manufacturer datasheet and use the compatible valve selections below to support product selection. Availability and delivery are confirmed with your quotation.

You may also like