Skip to product information
Duplomatic PLK08-035/10N/K � 3D CAD view

PLK08-070/10N/K - Duplomatic pressure relief cartridge valve

€40,80
Excl. VAT
Send enquiry

Availability and delivery terms are confirmed by email on request.

Email this product enquiry directly


Product Description

Manufacturer Duplomatic MS Model / ordering code PLK08-070/10N/K
Valve function Pressure relief Operating principle Direct operated
Cartridge cavity SAE 08 Mounting thread 3/4-16 UNF-2B
Maximum operating pressure 400 bar Maximum flow rate 3 l/min
Pressure adjustment range Up to 70 bar Adjustment Adjustment knob /K
Seal material NBR Cartridge tightening torque 50 Nm
Approximate catalogue mass 0.15 kg Fluid Mineral hydraulic oil HL/HM, ISO 6743-4
Ambient temperature −20 to +60 °C Fluid temperature −20 to +80 °C
Viscosity 10–400 cSt Recommended viscosity 25 cSt
Fluid cleanliness ISO 4406:1999 20/18/15 Design series 10

PLK08-070/10N/K — Duplomatic pressure relief cartridge valve

The PLK08 is a direct-operated screw-in pressure relief cartridge for low-flow hydraulic circuits and pilot pressure protection. It fits an SAE 08 cavity with a 3/4-16 UNF-2B thread. Pressure acts directly against the spring-loaded poppet; when the setting is exceeded, the valve opens from port 1 towards reservoir port 2. Its 3 l/min flow rating makes it suitable for pilot circuits and pressure-limiting duties where a large main-flow relief valve is unnecessary.

This PLK08-070/10N/K version has up to 70 bar pressure adjustment and adjustment knob /k. The cartridge is rated for 3 l/min and a maximum operating pressure of 400 bar. NBR seals are specified for mineral hydraulic oil. For replacement selection, match the complete code, cavity drawing, flow and pressure range. Minimum controlled pressure and pressure rise depend on flow; consult the attached characteristic curves. The cartridge tightening torque is 50 Nm.

You may also like