Product Description
| Manufacturer | Duplomatic MS | Model / ordering code | RM2-W3/31N/K |
| Valve function | Pressure relief / pressure control | Operating principle | Direct operated |
| Pressure adjustment upper limit | 70 bar (range code 3) | Maximum operating pressure | 350 bar |
| Maximum flow rate | 50 l/min | Minimum controlled pressure | Flow-dependent; see catalogue curve |
| Pressure port P | 3/8 inch BSP | Tank / outlet port T | 1/2 inch BSP |
| Mounting | Panel mounting with ring nut SKF KM9, M45x1.5; panel thickness 5–8 mm | Pressure adjustment | Adjustment knob /K |
| Seal material | NBR, for mineral oil HL/HM | Seal code | N in RM2; omitted for standard CD1/RM3 |
| Design series | 31 | Approximate catalogue mass | 0.9 kg |
| Ambient temperature | -20 to +60 °C | Fluid temperature | -20 to +80 °C |
| Fluid viscosity | 10–400 cSt; recommended 25 cSt | Fluid cleanliness | ISO 4406:1999 class 20/18/15 |
RM2-W3/31N/K — Duplomatic direct operated pressure relief valve
RM2-W3/31N/K is a direct operated pressure control valve with a pressure adjustment upper limit of 70 bar and maximum flow of 50 l/min. This standard NBR version has an adjustment knob /K.
The RM2-W uses threaded BSP ports and panel mounting with a ring nut. The P inlet is 3/8 inch BSP; the T outlet is 1/2 inch BSP. The panel mounting thread is M45x1.5 and the catalogue specifies an SKF KM9 ring nut and a panel thickness of 5–8 mm. RM2-W uses direct operation for flows up to 50 l/min.
The 350 bar maximum operating pressure and the selected pressure adjustment limit are separate ratings. Codes 3, 4, 5 and 6 identify adjustment limits of 70, 140, 210 and 350 bar respectively. Minimum controlled pressure and the pressure rise with flow depend on the operating point; use the catalogue curves for sizing.
Selection and installation
The manual knob provides pressure adjustment without a hex key. Specify the complete order code, thread standard and required flow when selecting a replacement. NBR seals are suitable for mineral hydraulic oils HL/HM according to ISO 6743-4. FPM/Viton versions require a separate specification. The CAD file represents the matching external adjustment configuration shared by the pressure range variants.
IMPEX CONNECT accepts international B2B enquiries for hydraulic pressure control components. Availability, lead time and buyer-arranged collection are confirmed in the written quotation. Displayed prices exclude VAT.